BIIC-Tech is a leading measurement company in China now,
dedicated to high-end analytical measuring instruments
Hot Products
Contact us
AF-3000 Series Atomic Fluorescence Spectrometer - China Suppliers and Factory for Advanced Element Analysis
Features
🔬 Measuring Range
Can measure 16 elements: As, Sb, Bi, Se, Te, Pb, Sn, Hg, Cd, Ge, Zn, Au, Cu, Ag, Co, Ni, and more.
After upgrading, it can realize speciation analysis for As, Hg, Se and other elements. Relevant accessories enable the determination of excess mercury in water and gas.
💡 Optical Path and Light System
Short focal length, fully enclosed, dispersion-free optical system.
Can be equipped with a high-precision digital automatic light alignment system.
Special optical traps effectively eliminate stray light interference and improve measurement stability.
🔆 Light Source
Built-in chip automatically identifies and tracks the use of hollow cathode lamps.
Microcomputer-controlled current automatically matches sample concentration, maximizing lamp service life and measurement accuracy.
Compatible with non-coded hollow cathode lamps from any manufacturer.
High-frequency pulse width modulation and square wave smoothing technology improve analytical sensitivity and extend lamp life.
Integrated wide-range high-voltage power supply module is unaffected by mains voltage fluctuation — fast response, good stability, high reliability.
Self-calibration system effectively reduces measurement error caused by hollow cathode lamp energy drift.
🌿 Exhaust Gas Capture System
"Efficient mercury removal technology" with ultra-large flow active capture system effectively solves mercury pollution and purifies the laboratory environment.
Adaptive exhaust gas filtration system stabilizes hydrogen and oxygen flame and effectively adsorbs harmful gas components.
📡 Intelligent Monitoring System
Optional video visualization system in the atomization chamber for full-process flame state observation.
Real-time pressure monitoring of the high-precision digital air system.
Flame sensor monitors hydrogen flame ignition status in real time.
Adsorbent material life monitoring system accurately calculates replacement time.
💻 Software System
Single standard automatic preparation of standard curves, automatic dilution, and automatic overrun labeling.
Fully compatible with Windows 7/8/10/11 operating systems.
Software automatically recognizes all accessories and extension modules, switching to the associated interface automatically.
Innovative auto-port scanning and auto-communication function.
Multi-sample set function enables grouped testing of multiple sample sets with different sample blanks.
Export analysis data to Excel; import/export sample information from/to Excel for faster editing.
Online expert system provides personalized instrument usage assistance based on actual user situations.
⚡ Electrical System
Intelligent electrical system module design with automatic optimization of working parameters and fault diagnosis.
ARM+FPGA main control architecture; core components controlled by independent MCU with multi-core collaborative operation.
AD7606 main acquisition chip achieves 8-channel simultaneous acquisition at 200kHz throughput; multi-channel hybrid acquisition technology with 1kHz sampling frequency effectively suppresses inter-channel interference.
🧪 Gas-Liquid Separation System
New lifetime maintenance-free, jet-type three-stage gas-liquid separator.
No peristaltic pump required; water seal forms automatically and waste liquid is automatically discharged, eliminating waste liquid accumulation in the atomizer.
Completely eliminates bubble influence in online hydride reactions; fully resolves foam issues from high organic matter samples during vapor reaction.
HJ542 standard gas-liquid separation system available for mercury determination in ambient air using base cotton enrichment — cold atom fluorescence photometry.
🔧 Integrated Multi-Manifold Four-Way Hybrid Module
Micro-liter dead-volume cross-way hybrid module with excellent smooth fluid path — minimal shear and turbulence for stable fluid transfer and excellent signal peak reproducibility.
Full PEEK material four-way mixing module with fully transparent online reaction pipeline for real-time observation of steam reaction state.
Purge pressure equalization flow path design greatly improves vapor reaction repeatability.
🌡️ Cryogenic Atomization System
Fully enclosed atomized system, unaffected by external environment changes.
Lifetime maintenance-free, corrosion-resistant, EMI-free pulsed hot face ignition technology.
"Infrared heating constant temperature control" quartz furnace atomizer with temperature control accuracy of ±1°C for stable and reliable analysis results.
"Low-temperature atomization" technology with automatic hydrogen flame ignition improves analytical sensitivity, reduces gas-phase interference, and reduces memory effect.
No shielding gas required, greatly reducing argon consumption.
💨 Pneumatic System
Intelligent dual-air system with modular design.
Throttling mode significantly reduces argon consumption.
Array valve terminal or full mass flow meter air circuit control with accuracy up to 1mL/min.
Air circuit is automatically controlled and diagnosed; power supply automatically cuts off upon shutdown.
Functional Expansion
Optional PD1-30 coupling interface device and guided workstation system upgrade module enables As, Hg, Se and other element morphology analysis.
WM-10 special device for direct determination of excess trace mercury in surface water, seawater (class I & II), tap water, and source water.
Optional VM-10 "gaseous mercury" determination device for direct ultra-trace mercury detection in air, natural gas, laboratories, and work sites.
Flexibly compatible with autosampler for fully automatic or semi-automatic operation.
Can be equipped with AS-10 (45-position) autosampler.
Can be equipped with AS-30 (up to 260-position) autosampler; supports 10mL, 15mL, 25mL, 50mL plugged colorimetric tubes or 100mL glass volumetric flasks simultaneously, with programmable cup positions and programmatic storage.
📐 Size: 780mm (L) × 590mm (W) × 380mm (H)
⚖️ Weight: 50 Kg
Frequently Asked Questions (FAQ)
Q How many elements can this atomic fluorescence spectrometer measure?
The instrument can measure up to 16 elements, including As, Sb, Bi, Se, Te, Pb, Sn, Hg, Cd, Ge, Zn, Au, Cu, Ag, Co, and Ni. After upgrading, it can also perform speciation analysis for elements such as As, Hg, and Se.
Q Is the instrument compatible with hollow cathode lamps from different manufacturers?
Yes. The instrument is compatible with non-coded hollow cathode lamps, allowing users to purchase high-performance hollow cathode lamps of any model from any manufacturer without limitation.
Q What operating systems does the software support?
The software fully supports Windows 7, 8, 10, and 11 operating systems. It also features auto-port scanning, auto-communication, and automatic recognition of all connected accessories and extension modules.
Q Can this instrument determine mercury in water and air environments?
Yes. With the optional WM-10 device, the instrument can directly determine excess trace mercury in surface water, seawater, tap water, and source water. The optional VM-10 device enables ultra-trace mercury determination in gases including air, natural gas, and workplace environments.
Q Does the instrument support automatic sample analysis?
Yes. The main unit can be flexibly paired with an autosampler for fully automatic or semi-automatic operation. It supports the AS-10 (45-position) or AS-30 (up to 260-position) autosampler, accommodating various tube sizes and offering programmable cup positions.
Q What are the physical dimensions and weight of the instrument?
The instrument measures 780mm (Length) × 590mm (Width) × 380mm (Height) and weighs 50 kg, making it suitable for standard laboratory bench installations.